...Opticon handheld works great with 39 regular digit font. However, a new program that I am using won't print that font. I've switched to several different barcode fonts that I can print, the the ...
No green ready light after replacing a worn out trigger assembly my HLT/ELT1105/004 ready light doesn't light up when I plug in to the wedge (which is powered up). This has happened with two different
opticom bt25r i have changed phones but lost the instructions for my opticom bt25r. So does any one know how to unpair my old phone and set up my new 1 thanks To pair your new device (opticom bt25r) ...
Question about OPN 2001 Mobile Data Collector Barcode Scanner
...Opticon Bar code reader. Hi! Keyboard Wedge Barcode Scanners are sometimes tricky because they will not operate if the keyboard is physically attached to the Scanners' "Y" cable. A possible solution ...
working but will not scan the product, I downloaded what was on the scanner and that worked, but still not getting a beep after scanning the product. I held both buttons down to clear the device again
Question about OPN 2001 Mobile Data Collector Barcode Scanner
...opticon.com/uploads/Software/USB%20Drivers%20Installer.exe Here is the link to download the drivers, make sure the scanner is not plugged in until after the drivers are installed. This may not work, ...
my unit is fully charged and it will not turn on Hello, if it does not power up, then it means its having a power problem. it might have worked fine in the past, but that's electronics for you. Power ...
My tablet will not come on The item will not charge and will not come on at all PUT THE CHARGER WAIT 30 MINUT TRY AGAIN IF STILL NOT WORK NEED REPAIR!!
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions