Questions & Answers for: Quantum optical sensor

New Hardware Wizard should then load, and you might be prompted to insert your Windows CD into your optical drive, though this should NOT be necessary if you've previously installed any other FireWire

Quantum Apollo 16000 Portable Projector My brand new overhead works great for 10 to 12 minutes and then the light goes off. The fan will continue to run and after about 8 minutes the light will come ...

Quantum superloader not showing in windows device manager We have an SBS 2003 server with Backup Exec software. The Quantum superloader with LTO2 drive that has worked without fault for the last 4 ...

How do I remove a stuck tape? Power the unit down and very carefully unscrew the cover.  The greatest care must be when taking the tape out so that you don't bend the unit. Consider blowing it ...

servo init failure stalled xy in quantum scalar 50 The unit will need to be repaired.  Consider getting a maintenance contract on it as my px502 cost me $700 to replace a sensor and cleaning and ...

The tape library ATL 7000 that POST failed and report SK=6 ASC=80 ASCQ=00 DOOR WAS OPENED INVENTORY MAY HAVE BEEN CORRUPTED Close door and retry command. just check the front door and rear door closed

WILL NOT STOP SCANNING; GOES TO A CERTAIN SPEED AND STOPS hi, There are two possibilities for this problem 1. Check the speed sensor on near the motor pulley. Remove the sensor and clean it and re-fix

my treadmill showing E1 error code hi i have QUANTUM treadmill it shows e1 on the screen ERR 1 - Motor Movement ERR1 indicates a speed issue. In this case, the motor speed as reported from the optic ...

You insert an optical disc with digital photos from your most recent family vacation, and discover that your computer will not read the optical disc. What might be wrong? Try getting the latest driver