Questions & Answers for: HP LaserJet can t open tray

Tray 3 open or Empty Hello, i am using a HP LaserJet 2430 dtn. I am getting the message 'Tray 3 open or Empty'. Can someone please help me. Thanks While tray 3 is detachable, when I remove it from my ...

...Tray will not open I just bought this printer and the paper tray refuses to open. Nothing has ever been put into it because it has yet to be succesfully opened. Is there a lock on it somewhere? Can ...

...open tray 2. Print a configuration page from the menu. Look at the tray set-ups. Sounds like you have tray 1 set to casette. Change it to "first" and the size to "any". The printer will then pull ...

...open Tray 1 to clear paper jam HP Color laser jet cp2025- I opened the front flap and opened the rear but I think the jam is further in and I cant figure out how to open it without breaking it. Leave ...

tray. Open the duplex unit access door just above Tray 2 on the front of the printer. Check the black-paper present flag by looking in through the duplex access door. Open and close Tray 2 and observe

...paper tray at the bottom of the printer.. perhaps that one is empty? Otherwise, you place the paper on the open tray that drops down in front when you open it, and extend and adjust the

...open the tray 1 door and pull out tray 2. 3. Push down on two tabs to release the tray 1 panel. 4. Remove the jammed sheet by pulling it straight out. 5. Push up on two tabs to replace the tray 1 ...

...error 60.02 plz help me. Tray 2 is not lifting the paper. Open the tray and look for obstructions. Remove and reseat the tray. Try switching trays 2 and 3. If that doesn't work, reply back to

...jam open input trays display is saying "13.2 paper jam open input trays then open and close top cover" Check for any paper jam in the tray and restart the printer and put it caliberate ...

...I cannot get my printer to stop using the manual feed tray (the front compartment that has to be opened) on my P2055d Printer. I want it to automatically use the bottom tray (which I think is ...