Questions & Answers for: open jet tub

...2 of them feel like they are trying to work. suggestions? Make sure the jets themselves are fully opened. Some models you can turn individual jets on & ...

...I only have cold water, how do I fix this problem, thanks Check to see if there is an open valve where the water exits the tub. If there is a valve, shut it and your problem should be solved. good ...

...tub will have to pulled out to find out what is leaking so it can be fixed. There is just no other way UNLESS you can open up the wall on the blind side of the tube. (but its probably and exterior ...

...tub, press button, hear motor but no bubbles,etc coming from jets Are the jets open? The center of the jets turn to adjust the pressure of the jets. If this is not the problem, there may be a problem ...

...jet and tub, if it is a gold or silver trim ring, they will generally pry off with a screwdriver, just be careful not to damage the tub when doing so. When prying, move the screwdriver around the jet ...

...tub? How? no not really the only way to fix it right is to open up the walls. this is a common problem with these units, the best thing you can do is contact the manufacture who made it and ask them ...

...remove the jet where it mates with the tub and see what's going on in there. Also, you might want to open your access hatch and see if you can get to your non jetting jets this way. Hope this

...tub without the jets being opened ( i have cleaned it but black stuff still comes out of them!) . Are there covers to close the jets? There currently is no option for closing the jet openings for any ...

...them left or right. The other issue may be the water depth in the tub before you are turning it on. Make sure the water level is at least two inches or more above the highest jet. Rod US Parts ...

jet on whirlpool tub vinegar or 4 parts water 1 part muriatic acid first of all you need to be draining the tub completely and removing any bath mats or items from inside. Fill the tub with hot water,