Questions & Answers for: Westinghouse open iron

...( only used it once ) because of the same problem and asked my husband to take a look at it... he opened it ... cut the zip ties took the metal banding off ( note only one side of the motor has the ...

iron probably has an open heating element.. Probably not worth repairing.. since thecost to repair might be equal to the cost to replace.. Wrinkled clothes are making a comeback... ( at least .. in my

...this is most likely the capacitors on the power board in the monitor, if your comfortable wkith opening it, and good with a soldering iron, etc then you can most likely fix it, just look at the ...

replace filter beads how do I open the compartment to replace the filter beads for my iron? how do I open the compartment to replace the filter beads for my iron?

iron. I laid the TV on it's front and took 3 screws out of the back panel. That is as far as I got because I couldn't figure out how to get the cover off. So I plugged iot back in and it worked like a

...by a loosened terminal in the power supply board. Open the back cover of the television and locate the power supply panel. Check the PCB for loosened terminal and have it soldered by a soldering

Open the back cover of your TV. 2. Look at the power supply board..Its normally connected to the power cord.. 3. After that,,try to look at the actual image of capacitors if it is bulged on the top so

...open the one at the top with using a screw driver.2- there is a connector on the top, make sure that it is connected well. As far as I understand there is somehow a connection problem or maybe ...

...I removed the remote control unit and plugged the fan and light in direct. They both worked. When I opened the remote device (fits inside the shell where the fan bolts to the ceiling) that I had ...

...and if that company folded they will never be found .I would think an electrical engineer could open it up and make his own tho