...OPEN FUSER THERMISTOR 542:LOW FUSER TEMPERATURE 543:HIGH FUSER TEMPERATURE 544:HIGH FUSER TEMPERATURE 545:HIGH FUSER TEMPERATURE 546:LOW FUSER TEMPERATURE 547:ZERO CROSS PROBLEM 550:WEB EXPIRED ...
...HDD and install them before proceeding to the next step. 5. Put back the controller board and replace the left rear cover. Paper Height Sensor Installation 6. Remove the connector cover [A] and lower ...
...open the front door - not sure what screws to take out. a paper jam will not stop this from printing only in the middle? make sure it is the same for all colors , not printing in the middle. if all ...
...HDD. open the back of the machine and unplug the HDD. Swith the machine on. If it turns on the HDD is faulty. The machine will work without the HDD but you will not be able to use the doc server. To ...
...open and a sc 870 error on the machine. are these two problems connected in any way and if so, what is the solution Your machine is telling you there was an error trying to read user info on the hard ...
how do i configure locked printing Hello! Befour that you need to know if your model have HDD (hard drive). If so you just have to Open your driver properties and you will see it. See you!
...PRINT AND COPY.WHAT I COULD DO TO FIX IT Thats a hard drive error. Initialize SP5-832-008 or replace the HDD! Most machines use a simple IDE HDD. Just open the machine at the back, youll see the ...
...THIS Hard drive may have crashed. Turn off copier and open back panel and unplug hdd from the pcb and turn on machine to see if it will boot up. If it does, the hdd needs to be formatted or
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions
