Questions & Answers for: Brother DCP open back

...Back door open" error on the LCD panel. There is a "interupter" type of sensor that detects if the back door is open or closed. When the back door is closed a lever is pushed forward and blocks the ...

Back Door Open on Brother DCP-7020 printer Display indicates that the back door is opened. I open and close the back door but the message never goes away. I have checked for pieces of paper that maybe

back door open. I tried printing on a T-shirt transfer sheet and the printer jammed. I got the paper out but I think it my have gummed up the works. I could hear it trying to grab paper making a noise

...back cover open fault The printer feeds paper and then stops with the paper 1/3 the way into the fuser. A fault "back cover open" appears. To clear you have to remove the drum / toner assembly and ...

open the back door, there's a sensor flag on that cover that goes thru the right side to a sensor, the arm on the guide needs to move freely, and the flag on the right must pass thru the sensor inside

Back door open alert Twist the printer so that you can see the back of the printer. Near the bottom, there is a door that swings down. Swing it down and it will open (get familiar with it). Then close

7020 printer displays error The Brother DCP 7020 printer displays error message "Back cover open", even when it is closed. What do I do? back cover door switch is displace so it called back cover open

the error message: Back cover is open. Close the back cover. I don't see any open back cover. could you please tell how to fix this problem? Brother International - Support for your Brother Product

open the back cover - on the back of the printer. HOW: it flips down (B) open the fuser cover and remove paper jam How: Pull the 2 tabs (one left and one right) toward you to open the fuser cover. (it

BACK COVER OPEN The back cover sensor is detecting the back door is opened. Open and close the back door firmly to fix this message.