Questions & Answers for: onkyo receiver fuse repair

...Onkyo does not have an authorized service dealer in the Dallas/Fort Worth area and suggested I ship it to their regional service center in Michigan. Before I do that, I would like to know if this is ...

onkyo tx-ds676 dead no power up Hi Expertsi have a tx-ds676 and it´s connect to line the red led at power buton comes light but wend i try to push the staby /power button the receiver doesn´t work no ...

onkyo receiver my on/off button does not work now. yesterday i pushed it on and it work, today, i push it on and nothing happens. You need to call Onkyo and have it sent in for a repair. Unless you ...

Onkyo TX-SV444 A/V Receiver. I have had this receiver for about 12 years.One day I noticed the receiver kept cutting off after about 3 or 4 seconds. After a couple attempts of turning the receiver on,

...Onkyo TX-SR701 and it was working fine last night. My wife went to turn it on this morning and it won't turn on. The red standy light is on, but the amp won't turn on. Any thoughts? I'm at work right ...

...Onkyo Receiver no sound out of right Onkyo 501 Onkyo Receiver no sound out of right channel. Wire and speaker are good. if you are good at tinkering then you can pulol the top of the receiver and ...

...Onkyo receiver is set to be remotely controlled from another location. Normally, this arrangement would be initiated at the time of set up but could be done later. You may have to repeat the initial ...

...ONKYO RECEIVER TXDS 575 POWER COMES ON BUT NO POWER ON SCREEN ONLY ONE FUSE I SEE AND IS GOOD ARE THERE ANY OTHER FUSE WHAT IS THE PROBLEM WHAT IS WRONG THAT CAUSES NO LIGHT ON THE FACE BOARD/ There ...

...receiver Onkyo model number ASV 620 onkyo Hi Rosie, the unit would have to be taken to one of our authorized service centers for repair. You can located an authorized service center at the following ...

Onkyo dr s2.0 DVD receiver has subwoofer output but no other speakers have sound. I have experience with electronics. Is there fuses for the preamps and power outputs separate from the main in ? I ...