Question about 24032\24036 Top Load Washer
...oL" & the clothes are not spinning The washer is only about 2 yrs old! I tried putting less clothes but it still says "oL" which I assume means overload. The fabric softener doesn't go into the ...
Question about Oasis HE 27082 Top Load Washer
I was washing clothes and screen says oL. What does that mean? OL, usually means Over Loaded. It is an error code thrown up by the on board computer.. generally when TOO much wet weight is in the bowl
Question about Elite Oasis 27052 Top Load Washer
...OL error code on my Kenmore Elite Oasis HE washing machine. It seems as if the washer isn't going through its final spin cycle or something. My clothes are very wet and I've been having to wring them ...
Kenmore washer oasis mod #110.27062601 is displaying a oL code but there is hardly anything in there, it even does it when it's empty. Any thoughts? OL error means the Motor Controller has sensed an ...
OL KENMORE WASHER OASIS ERRROR CODE OL BEFORE TO GO SPIN CYCLE OL error means the Motor Controller has sensed an Overload. The oL code means the motor control board is struggling to power the motor up
oL mean when the load is over? We just moved into a place with the washer and the clothes are soaking wet after the load is over? It's the kenmore elite. Hi Thanks for using FixYa. oL flashes when the
...Kenmore 110.27032600 Elite washer. It stops at the final rinse and spin cycle and gives a code of oL. Is this a board replacement issue? They had a recall about a year ago but wouldn't leave me the ...
ol error on oassi elite washer my washer told ol code ,i know that means over load ,put its told me that even when i put small load
Question about Oasis HE 27082 Top Load Washer
...oL mean? OL error means the Motor Controller has sensed an Overload.The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually ...
Question about Oasis HE 27082 Top Load Washer
...OL errors usually mean that the washer is overloaded or the motor is working too hard to move the tub relative to the drive shaft during agitation of the load. For an overloaded washer, removing some ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions