Questions & Answers for: oki printer printing properly

OKI 5400DN It does not seem to be printing blue properly. The ink cartridge (yellow) looks empty but it has not asked me to order or replace the cartridge. just check the cyan leeds head and clean it,

oki c5150 printer i have new drums and toner in it and its now printing darker i put the old drums and toner cartridges back in and its still printing darker. any ideas as to why? charging connections

OKI C5300 print out has "toner" blotches which appear to be from toner that has leaked out of one of the cartriges on to the belt that carries the paper through the printer (same location on the paper

...printing from my oki c9300 hello - when printing, the colours appear dull and muted compared to what they used to be... any ideas? whipe the 4 LED arrays which stick out from the top when you open it ...

Oki 14ex printer then add printer it seems to install ok - however I am unable to print - gives a message that the hardware driver did not install properly. Does that mean it is not compatable with xp

OKI C5510 - when printing on photo paper, makes goo all over and photo does not print properly?? you must choose the thickest media type possible at the printer and on the pc. your fuser is not fusing

...OKI c3300 Check to see if the toner is finish and also check to see if the papers are correctly place into the printer.If the paper is not push into the printer properly the printer will not be able ...

oki mb470 pages are not printing properly print on pages is uneven. replaced the toner cartridge but the print is not normal. there are light spots in the print to the point that you cannot read it. ...

...oki microline 391 turbo to work with windows 2003 server? How do I get an okidate microline 391 turbo to print properly off a windows sever 2003? use the HP laserjet 4 or 4000 print driver. this is ...

...oki c711 printer so that i can print withiout fusing on paper That makes no sense sir. In order for the printer to be able to place the toner and activate it, it needs to heat up in order to fuse the ...