...print :) So i know its not a starter cartridge, and i've 'utilized' OKI's site for all its worth. Was hoping someone knew a possible solution. Thanks! Have you checked the transfer belt that the blue ...
Oki 1220n/C5100n Laser Printer Problem We recently replaced all three color drums and then had problems with the black. So we replaced the black drum and now when we hit print, we can hear the printer
OKI Printing Solution C5800 color printer received the following error message: Check Toner cartridge 543K Toner Sensor error - have already changed the Drum and the toner. The error will not go away.
Oki Printer c3200 error code Hi I've had an error code 543 - k toner sensor error... what do I do to fix this...? is there a way to reset? I've taken the K toner cartridge out , cleaned, wiped off the
Oki Printer c3200 error code Hi I've had an error code 543 - k toner sensor error... what do I do to fix this...? is there a way to reset? I've taken the K toner cartridge out , cleaned, wiped off the
Question about Electric Industry C3520 Laser Printer
...print desperately over the weekend and there is no help line avaliable from oki. Please tell me what to do!! Thanks. Check the little switch/door on the right hand side of the drums. This has worked ...
toner warning oki c5600 410:Y toner warning replaced THE TONER CONTAIN NEED TO BE WASHED OUT WITH SPECAL CHEMICALS, PRINTS NEED MAINTNANCE, OVER FLOW CONTAINER MAY HAVE TO BE EMPTYED ALL SO, CORRORNA ...
...up toner sensor errors on all colours and keeps powering off and won't power on again. Really hope you can help. Thanks Marc Toner is a Black in cartridge that needs to be replaced once it runs
Question about Oki C530dn Laser Printer Duplex Printing
How to fix the Oki Toner Waste Bin Full Error Some OKI's have the sensors in the side frames, using a q-tip clean off they are round units, about the size of a nickel.
Question about Oki C530dn Laser Printer Duplex Printing
...oki MC332dn blanck vertical stripe for black text printing and read that the drum might be concerned ; so i tried to clean the black drum but after remounting, i get a message inspection is required ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions