t-clocs what does it stand for? tires control lights oil, chassis, stands,,,
general I am switching from a 2-stroke to a 4-stroke and im just wondering what maintance do i have to do on 4-strokes i know you have to change the oil and oil filter but how often and is that the ...
t-clocs what does it stand for? tires control lights oil, chassis, stands,,,
Oil filter How do I change the oil filter? To change your oil filter remove oil drain plug drain oil into an oil pan clean and replace oil drain plug, then remove oil filter, pour a drop of clean oil ...
clutch snatching Madass 125cc Rode the bike and the clutch worked fine. stopped for a coffee restarted bike and engine would stall when putting in to gear. tried adjusting clutch cable and it was at ...
The front end (forks) seem spongy with little or no rebound, and wallow through corners Hi ! The oil in the shockers has leaked. You will need to firstly change the shocker washer and then only fill ...
front end seems to have no rebound and is spongy Are the for seals leaking? The quantity and viscosity of oil in each fork is pretty critical. Check your owners manual for the correct specs. Good luck
What type of oil should you put in a Madass 125 cc motorbike? Also if the motorbike is having a problem getting into 2nd gear, what could be the cause of this problem? Gear box? There is no oil in the
What oil do l need 10 w 40 oil my friend
Oil cooler on Sachs XTC125 4 stroke ?? I have removed the main cooler, but there are 2 tubes that carry the oil that I need to remove. Seem to be attached by some kind of metal fixing. Tried turning, ...
Usually answered in minutes!
12 Questions
1 Questions
7 Questions
6 Questions
5 Questions