Questions & Answers for: oil sending unit location 2004

...no oil pressure to high oil pressure. I'm guessing it's the oil pressure sending unit. Where is it located on a 2004 sequoia? have you changed the oil sending unit, this is the most probable

...oil sending unit is on top of the engine near the firewall possibly under/behind the distributor. Look at the extreme rear of the intake manifold. On some others it is mounted near the oil filter. If ...

...first check that all the engine grouds are good, next make sure the oil sending unit is good, make sure the connections are not loose. If not replace off the old motor or by a new one and replace

...oil sending unit,it screws in to block and is close to oil filter Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it ...

where is the temperature sending unit on a 2004 chevrolet trailblazer 4.2 vortec engine It is right next to the thermostat housing, which is located just behind the alternator.

oil sending switch location Oil pressure switch is located just above oil filter on passenger side of engine (assuming you have the 6 cyl. engine)

...as I start moving again it goes back up. My dad just changed the spark plugs and cleaned out the throttle body. i would try a new sending unit for the engine oil ussually located close to oil ...

...oil pump and sending unit but still no oil pressure but engine does not rattle or knock when running The sending unit is a variable resistor. When the oil pressure is normal only a small amount of ...

oil sending unit,it's located by the oil filter,it's screw into block,remove electrical connector,get wrench and remove,take to Auto part store and match it up with a new one.Here's a link to it. http

...oil switch located on a 2004 trailblazer LS v6 Try right above your oil filter if it not there look on the front of the engine it's called a oil pressure switch It's an i6 engine, not v6. Mr. Schultz ...