Questions & Answers for: Porter Cable oil fill

compressor struggles to fill the tank empty water out of air tank...should be drain on bottom of tank...or it may be low voltage bad regulator

runs continually sounds like air comping out from runs continually sounds like air coming out from under cover SOUND LIKE OVER FILL VALE

the motor runs but the tank won't fill Bad check valve on tank where air enters.

How long does it take for the compressor to fill up during the first use? The motor has been running for 15 min and the pressure needles have not moved.... Make sure the tank drain on the bottom of ...

oil fill port is and where to drain it. Does anyone have a manual in PDF? Thanks for your help. The manual for your porter cable CPL6025 can be found here.http://www.managemylife.com/mmh/owner_manuals

My framing nailer is not getting pressure but tank is filled to correct air pressure Is there any air in the line for other tools to work?

...oil fill holes: 1. If you have a motor with the oil fill/check hole on the bottom of the motor and a small screw-in plug either with or without a small dip stick on it; with the motor level, fill the ...

...fill up and turn off by itself. As for your nailer(s), check the body of the gun(s). Usually somewhere near the air coupler it tells you to oil or not to oil the gun. If you are not sure read the ...

when the compressor fills the tank up then shuts off, there is a air leak. When it goes below the amount, the pump starts up but sounds like it struggling. Then I need to manually bleed the air, then ...

...fill it with an air compressor oil. The recommended weight is SAE-30 (API GC/CD heavy duty motor oil). You can use a SAE-10 oil in harsh winter condiions. The manual is available from Manage My Life: ...