Questions & Answers for: how to make 6 ohm speakers into 8 ohm speakers

...ohm speakers I have an RCA surround sound system - model no. RT2760. The receiver is RT2760 home theatre receiver., Receiver and speakers are 4 ohm. Equipment specs = amplifier section: RMS output ...

...ohm speakers for 8 ohm impedence on receiver (HT) Hi, I just received an awesome receiver to replace my broken one. It is a sony STR-DE545. My speakers from my old receiver are from a htib sony from ...

...ohm speakers you will only be able to acheive a summed load of 1 or 4 ohms. If your amp can handle 1 ohm, then connect this way: 1 ohm: Connect both the positives and the negatives together on each ...

ohm. If this is the only speaker, then that's all the resistance you have to worry about handling. If you had two of these speakers wired in parallel, then the total impedence would be up to be 4 ohms

...ohm averaged speakers as 4 ohms. As a point of interest - some amplifiers are specified as providing their maximum power at impedances of 6 ohms, and there fore some speaker makers (including those ...

ohm load Speakers wired in parallel Recommended Amplifier: Stable at 2 or 1 ohm mono Option 2 (series) = 8 ohm load Speakers wired in series Recommended Amplifier: Stable at 4, 2, or 1 ohm mono Option

...2 - 8 ohm speakers in parallel = 4 omhs 2 - 4 ohm speakers in parallel = 2 ohms series = pos to neg of the 2 speakers 2 - 1 ohm speakers in series = 2 ohms 2 - 2 ohm speakers in series = 4 ...

...ohm coils/speakers would produce a 1 ohm load, which would cause the amp to overload, and go into "protect" mode. to achieve a safe load, you need to use 1x4 ohm speaker, 2x4 ohm speakers or a dual ...

...ohm speakers then it is to go from low ohm speakers to a high ohm amp. Your speakers will perform how they were intended if you match the ohm rating, so try to do that at if at all possible. ...

ohm dual voice coil speakers If you wire 2 ohm dvc speaker parallel that would give you a 1 ohm load. If your amp is only 2 ohm stable that would not work. You would have to wire the speaker in series