Questions & Answers for: ATK ohm settings

clutch problem Someone managed to knock over my T and I need a new clutch lever. Luckily nothing else damaged apart from a scuff on the bar end. Am I right in thinking a stroke lever is the same AND ...

why pro action Just wondering if anyone knew why Ohlins went with Pro Action to set up the dirtbike suspension? I have a pair of E440 Ohlins forks that need seals and I want to send them to someone ...

coolant status light led setting fro dirtbike What are you setting your coolant LED settings to on the dirtbikes? Mine is constantly on right now I'm guessing because it has an ATV setting programmed ...

bad regulator and starter Ok I went through all my connections on my bike for the regulator/rectifier/battery/alternator. I get 12.64 volts from the battery on the charging line and on the alternator ...

plug wire help I'm putting new plug wires and caps on the 500 Intimidator I'm restoring and I noticed a difference in Ohms between the new set and old set. My old wires with no caps are showing .2 ...

no oil pressure Hello I am a new motorcycle rider. I have a 600 Dirt Track Motard which shows an oil light and no pressure there is also a grinding noise. Recently I had to set it down in the street ...

Static Timing I just got a atk 620 Special and it is my first motorcycle so I am learning as I go... and well the book has helped me out quite a bit it is leaving me in the dark on setting the timing.

do you have info on 1995 260LQ service limit on clutch Have not been able to find any repair manuals or any kind of help for 1995 ATK 260LQ, service limit for the clutch and ohms/resistance for the ...

Hello please help me setting the timing on my 1996 atk 350 motorcycle Hi, Shawnsparks6 for this situation I would call my local dealer or reputable shop's service/parts department and inquire about ...

..."INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. 4. Hook up battery positive cable, then with your multimeter on the milliamp ...