Questions & Answers for: how to take off the brushes

...off because I couldn't get to one of the brushes. It was easy to get off (only 2 bolts) and just as easy to put back on. Taking the motor off made life much easier as fitting the brushes is

...off switch for the roller brushes. Try pushing the switch next to the main on/off switch that controls the brushes up and down, up and down, can you hear the brushes attempt to come on at all? If you ...

...machine is locked in the upright position, because an internal micro-switch turns the brush motor off. - Make sure brush switch on the handle is on. - Check the belt through the clear brush cover. ...

...likely there is gunk underneath the endcaps. In the small airdriven attachment those end caps come off. It's likely true of the beater brush underneath

...turning The belt is broken.Turn the vacuum so you are looking at the brush.That palte needs to come off.Some screw and some just pop on and off.When you have the plate off lift the brush out.The belt ...

...button won't engage brushes Dyson dc25 off button won't turn off, brush button won't engage brushes Hi ... did u get this fixed cos mine is the same hve to switch off on the

...off the brushes when using the hose attachement? I was wondering if the brushes can be turned off when using the hose attachments? Or does the brush stay on pointlessly? Nope, unless you see a big ...

...off and remove the brushes (PN CB-430). If the brushes are stuck, pull on them until they come out. If the brush contacts/wires break off, you'll have to remove the armature and push the brushes ...

Why won't the brush come down anymore. the brush light which should be green is off. The brush won't come down anymore - light is off (not green). Should I replace the brush? If its a X4 / X5, it may ...

cleaning. • The brush bar will not rotate when the appliance is upright. • To switch the brush bar 'OFF' (e.g. for delicate rugs and hard floors): - switch the appliance 'ON' - recline the appliance -