obd scanner ses light comes on as if the vehicle got ecm signal again. ses goes out as normal when you start the car and vehicle runs perfect no codes or anything as long as i leave a scanner attached
...OBD 1 scanner tool OBD 2 is 1995 and newer your vehicle is the earlier version.Any any rate guessing why the light is on can be costly with the light remaining on and no progress made if you have no ...
Emission system light indicator is on at all times go to advance auto parts and have them use the obd scanner. it will tell you what the problem is
...OBD Scanner on Pre 1995 cars? http://schematicsdiagram.blogspot.com/2011/12/how-to-get-diagnostic-code-without-obd.html ------------ OBD-II Trouble Code P0300? ...
"how to check codes" "how to check codes" this is too easy, just take a OBD2 code reader to plug the OBD part, and operate the reader, you will get the codes.____________JBT-CS538C auto ...
...take it to a local advance auto or auto zone and they can reset it when they read it. You have to have an OBD scanner in order to do it yourself or fix the problem that made it come on to begin
Question about 2002 Grand Vitara
...scanner to check trouble codes. need location of obd plug. I want to scan for any trouble codes cause "service engine soon" light is on. what country? having the connector does NOT mean it complies ...
...scanner. There should be two OBD ports on this vehicle, one under the steering wheel the other is located by the computer unit under the hood. Attach an OBD reader or OBD II Reader (available to be ...
...(or without scanner) the code by counting the number of blinks of the MIL (malfunction Indicator light) (aka check engine, or service engine soon). Autel MaxiScan MS309 OBD II Code Reader Scan ...
How to reset a computer on a 2006 suzuki reno 2.0 16 valve You can disconnect the battery for 5 min but you lose the codes. Try to use OBD scanner to get a code and what the problem is.
Usually answered in minutes!
790 Questions
537 Questions
479 Questions
450 Questions
489 Questions