...I figured this TV supported progressive scan since it has component inputs, but now I'm not entirely sure. Does this TV model actually support 480p? No it is only 480i with component cable
...up key and the TV should power on. Now press the pound sign and the rrecord button. Now press the upper SAT button and release . You should be able to control the set now. Thanks for using Fix
I connected the tv and dvd with a hdmi cable and now it is showing on my tv 'MODE not supported'......any advice it could be the cable. change cable hookup. make sure your tv can support an dvd player
...now the TV works just in Black & White (without Colors). I can not find where tu change NTSC / PAL (The TV does it automatically probably?). What other problem could this be? Well, unfortunately ...
Does Toshiba 40SL412 support PAL signal yes its in the setting of your tv or try to look in the manual most of the tv now is supported with PAL< NTSC or automatic.
...Now the tv turns on, you get a vidio display for 1 second, then the tv goes to black screen. Is there a power reset when you change out the main board? No, there is no power reset. You need to find ...
Question about HL32D2 32 in LCD TV
...to hook my tv to my computer tower but its saying not supported. i did have it hooked up before nd worked fine i had it hooked up before and worked fine. but now its saying not supported not ...
...Now use the power button on the front of the TV & turn ON the TV. If done correctly, this will bring-up the TV's Service Menu. In the Service Menu you'll see an OPTION for Factory Reset. ...
Question about HL32D2 32 in LCD TV
...TV and see if it works now. If it works, you can go back in and attempt to select 1080i or 1080p to see if they work... but again, being a Dynex, it is probably only a 720p TV... The PS3 is likely ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions