Questions & Answers for: Jeep not turning on

...works fine as do brake lights, 4-way flashers and tail lights when right turn signal is off. It is not burning any bulbs or fuses. I suspect turn signal switch mechanism has some burnt/shorted ...

Ad

rear turn signals stay on all the time, cant turn them off rear turn signals stay on (not blinking). pulled both flashers out, and their still on. the right turn signal will work normal when turned on

Ad

2002 jeep grand cherokee v8 ltd signal won't turn off the passenger side turn signal will not turn off or flash making the flashers not work either. I had to disconnect the battery to turn off the ...

Turn signals not working on 1998 Jeep Grand Cherokee Inside turn signal indicator arrow lights not working either. the problem is the turn signal flasher module. turn signals on grand cherokee not ...

Brake light and turn signal light not working I have a 2004 jeep liberty. Recently I had to replace the left rear tail light due someone hitting it. After I replaced the external light, I started to ...

Question about 2000 Grand Cherokee

1 Answer

...car. We have turned the steering wheel, pulled on it, put wd-40 inside where the key goes and yet nothing has worked....Any ideas? Please help The key needs to be replaced. Sometimes, not all, for ...

Question about 1998 Wrangler

2 Answers

...in the opposite direction it's not. (do this in neutral) If still in doubt, have someone try to hold the opposite wheel and do it again. If they can hold the wheel without it turning it's not a

Question about 1996 Grand Cherokee

1 Answer

...not turning. If not turning, check battery, relay and starting system. Once it turns, do testing with volt/ohm meter as outlined in most inexpensive manuals to find why it's not starting. Common ...

Question about 1996 Grand Cherokee

1 Answer

the turn signals on my 2001 jeep grand cherokee laredo do not work. the hazard lights work but the turn signals do not. they both work off of the same fuse in the fusebox and off of the same turn ...

cancellation spring in the switch maybe broken/weak and not turning off the signal or the steering wheel is not centered and not allowing the cancel spring to contact the switch off position correctly

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...