Questions & Answers for: Mercury Villager does not turn

...not turn. Steering wheel seems locked. Tried secondary key. try this quick while trying to turn the key turn the steering wheel back and forth sometime it binds the key switch if that doesnt work let ...

...not turn off. The wipers will not turn off or go back to delay mode. Once turned on, they do their own thing. How do I get the turn signal arm off? you have to pull the steering wheel and there are ...

...not turn on then it either the thermostat is bad or the fan. When you turn the air condition on then the fan should also turn on. Start with the cheap part which is the thermostat.Then work for

timming belt not broken does not turn. 98 Villager timming belt not broken does not turn Maybe it's teethless, check this first

...not turn off at ignition... got it van would not turn off at ignition..the key would not go backward to the off position.. got it turned off by putting it in neutral, now it won't start. The key will ...

the key will not turn acts like its the wrong key sounds like your igniton lock cylinder or your steering wheel is turned to far, try tapping on it then turn the key

...Turn signal was not working so i change flasher that did not solve. so I bought new Turn signal switch (Multifuction switch). I put new one in see everything working fine. So I put my old switch to ...

...doesn't turn If the shaft in the distributor does not turn, either the shaft or gear is broken, or the cam is not turning in the engine.  That could be from a broken timing

not turn over head lights come on engine was turning over but is now not even clicking Yes, pull out the kick start. The kick start is a bent metal lever usually located on the right side of the bike.

...intact, but not turning!Any thoughts? your crank is turning but your belt is not,try tightening your belt,if this does not help your belt to turn then something is seized preventing your belt to ...