Question about 1990 LS 400
...up and down also no power when step on the gas pedal.It barely run when hot due to lack of power. The shop replaced the air flow meter but not fixing anything. Any idiea Pls help. have mech ck ...
Question about 1992 Ls 400
NO DASHLIGHTS NO POWER FOR DOORS AND OR ACCESORIES NO LIGHTS ON THE DASH AT ALL NO AUX POWER SEATS WINDOWS TURN SIGNALS STEERING ASSIST DOES NOT WORK EITHER. check fues under hood
...advice to know were to start first. My car is a 94 Lexus ls 400 CHECK THE IGNITION SWITCH FUSE.IF IT LOOK OKAY.I AM LOOKING AT THE IGNITION SWITCH.IT COULD BE OPEN.ITS NOT SENDING POWER TO
...not a switch issue. Just check and make sure that you have power and ground to your tailights. It sounds most likely like an electrical problem. The best way to find the problem is to get an ...
...power steering slowly got hard to steer and now it is not powered at all As mentioned check ps fluid. If it wines when turning and still no power then the pump is internally bad.. If the fluid is ...
...power hit the starter with a hammer (be careful not to break the starter) and if the starter is bad it may start when hit with a hammer. if that is the case then you will need to replace the
...power stering fluid. You would not think that would be related but there is a vacuum switch on the power power stering system and if that fails it sucks power stering fluid into the vacuum line ...
power steering pump with yours. The used one may not suit your car. I came to know a site which has all car parts which includes power steering pump for your car make. Have a visit at this link. http:
Question about 1997 LS 400
power-window-not.html ------------ Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html --------- power locks, power window and power
Question about 1993 Ls 400
...the passenger side of the engine to remove it. when reinstalling pump be careful not to let any power steering fluid drip down into alternator. That could cause a premature failure of the
Usually answered in minutes!
Step 2: Please assign your manual to a product: