disc. The machine shows load....load....load....load, and eventually shows Disc Error. Can you help? Is this a dirty lens issue - one that I can affect? Thanks. UNPLUG UNIT AND LEAVE OFF FOR 1 MINUTE.
...disc it will start spinning and load and start playing. I thought I had fully fixed it. It will load most times but now the video and audio stutters as if the discs is spinning at varying rates. same ...
...correlating with that of the game..... I mean if your game is NTSC and the disc is PAL your game might not load this discs. So make sure the discs playing mode are the same with the games. thank
...load cycle.Will not play a disc" "Does it do it to ALL disc.? Or just the one disc.? Buy a good CD disc cleaner, do not buy it at the "Dollar" store and try by cleaning your machine heads.Clean your ...
Question about PlayStation 3 40GB System
...load the disc it ether freezes or shows the error 80010514 pleas help sometimes it loads a disc and most of the time it dose not.but when it dose load the disc it ether freezes or shows the error ...
disc changer will not load and play selected disc. It loads and unloads disc #1 then loads and unloads disc #2 and so on loading and unloading discs but not playing any It needs a new optical eye,also
Question about SD-P1900 Portable DVD Player
...load disc it does not start spinning. I close cover and still do not hear the disc spinning. The screen reads loading disc, but then reads no valid disc. HelloThe Sled Motor is defective. this ...
Question about RDR-GX300 DVD Recorder
load then finally say disc error. Previously to the discs not loading at all, I was able to occasionally get one to load and format then I could record without a glitch. But now I just get disc error.
Question about D1812 Portable DVD Player
disc. - Load a disc into the tray. Disc has been loaded upside down. Place the disc with the label side up. Disc region code does not match region code of the player. Disc type is not the correct type
...load a CD/DVD, it picks the disc up, moves it (almost) into position for the spindle - but its off by about 5mm, so the spindle does not engage, and the disc drops. Lucky, this set is new to me, and ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions