Questions & Answers for: Friedrich not heating

heating coils are not getting heat without power supply check out the plug in wire and whole supply. If the unit will come on in heat mode but won't blow hot air, check the Hi-limit switch and heating

...not heat. Unit was purchased in 2003. Unit has functioned fine cooling and heating for 5 years. I was able to get the heat strip to work for a few minutes (smelled the dust collected over summer ...

...problem. The problem is that the blend door in the plenum is stuck in the A/C position and will not reposition to allow heat. There are two possible issues. 1: The Acuator has snapped off

...serial ldcr11178 Make sure your power source is still supplying power. Breaker box, maybe you have another too many appliances hooked up to same circuit? If that does not work, get advise from your ...

...Heating, 9.3 EER PTAC Air Conditioner With Heat Pump and 5.0 KW Backup Electric Heat....in October of 2007...it was installed in November and ran perfectly until the last 2 weeks or so...it has ...

...heating elements. Should I be worried? It is not normal to have a loud buzz associated with the electric heat. Try turning the heat off and running the fan only to see if the buzz continues. The buzz ...

air blows, and there is a click sound as though the unit is trying to start the heat pump, but then nothing really happens...just the fan continues to blow cold air. Any help would be appreciated. BTW

Runs in only resistive heat mode (not heat pump) even when the outside temp is above 40F. A/C also produces heat. Thermistor is likely bad and the unit thinks it is too cold outside for the heat pump ...

...not heat blowing cold air when temp setting is on heat You need to check your model # a CP06 is a straight cooling window unit you may have an EP08G10 this is a heat cool unit. Double check your ...

Friedrich X Star EQ08M11 blows warm air when High Heat is selected. During a cold front, it is not enough to warm the room. Any suggestions? Whats the outside temp?