Questions & Answers for: northstar stator

North Star 5500/ lost one leg of the 220v The generator now only has an output of 110v, should have 220v . Half of the 220v plug works and one of the 110v outlets work. There are no opens in the ...

...NorthStar 5500 generator head no longer produces any electrici electricity. It is a brand new unit and I am powering it with a 1987 Chevy S10 engine. It did produce electricty yesterday when I was ...

Have a portacable generator. model BS1550 w Runs Have a portacable generator. model BS1550 w Runs good but no power to plugs. circuit breakers are not poping out could they be bad. Breakers could be ...

Honda 5500 Generator Generator runs great, but not putting out voltage. If you have checked the stator, rotor and brushes and they appear alright then it is probably a voltage regulator. The honda ...

...NorthStar 5500. The generator has no output. (distrobution box disconnected) looking on the output directly from the wireless generator. Do these go bad and are there replacable parts inside them? Is ...

generator runs fine- does not produce any power- checked breakers all ok The voltage regulator for the generator is not work, replace it. Why, if there no dc voltage to excite the stator it won't ...

We were using the generator for 2 days. Only running it during the day and off at bed time. On the second day all of a sudden the lights got very dim and did not get any brighter even when I shut off ...

...stator and rotor look like on NorthStar 5500W generator The stator is the series of copper windings inside the generator (does not move,). The stator will have several pairs of leads connected to the ...

northstar generator that runs but not putting out any power have not tried anything yet If it has sat, it may have lost it's rotor residual magnetism. Disconnect the rotor field wires at the AVR or on

Northstar 5500. Voltage good. sounds and runs good. But, makes bad noise from gen head area when under any load. I replaced the bearing. Anything else? Stator is contacting the rotor, did you replace ...