Questions & Answers for: northstar pressure washer problems

Will not fire.blower runs.have 120voltage.to all switches blower and ignition sparks blue. I think its a no fuel problem what can stop fuel flow Empty tank.

NORTHSTAR PRESSURE CLEANER MODEL 1575551e IT HAS NO PRESSURE Hi Please advise more deatils and i will get back to you. Hello I have a older 16 inch Northstar surface cleaner and it worked wonderfully

Model #1578961A. The pump pressure cuts in and 8 HP Model #1578961A. The pump pressure cuts in and out. Pump appears to be made by ANNOVI model XMV 3G30 usually caused by a supply problem, make sure ...

my electric stea pressure washer wont ignite burner There can be multiple problems with the burner. Here is a link to a page for troubleshooting burners. link

...Northstar Pressure Washer. When I remove spark-plug it is very easy to pull cord. With plug reinserted it is extremely difficult to pull cord to start engine. you need to keep the gun open so allowed ...

...northstar unit model# 66DX that looses pressure after you press the trigger. The pressue is great at first but dwindles from there. I have resealed the pump and replaced the spring valve what else ...

burner lights for a few seconds then goes out and wont relight mod # 1572251a this could be a number of problems, first thing is replace the fuel filter

heater will not lite Donnie I have same problem, did you get it resolved?

...whenever i had that problem there was insufficient water pressure from the house and the pressure washer would run like ****,  or did you try to adjust the pressure regulater to get more ...

Will not start do you have spark?try starting fluid that will tell you if its a fuel problem