...filter in place the noise doesn't seem to go off. What could be the problem? Is that something that I can fix by myself? Thanks. Maybe you and the person from the post below could get together and ...
Question about RVM1635 Microwave Oven
...noise, can't see anything moving after removing the filter). Do you feel air flow? That's the key. Most microwaves have the exhaust fan assembly at the back edge, not up front immediately behind the ...
...noise filter....(noise filter is a ciarcuit board mounted to one side, should see 2x 10a fuses on it and a small 1.25A)...underneath, a circuit board...thats the lv transformer assy. Check the 10A ...
the fuse and it's fine. I unplug the power to the noise filter and plug it back and it worked. It works temporary and then it died out on me again. Does this sounds like I need a noise filter replaced
...the Magnetron tube. this is the main heating device. the noise filter is also damaged and, should be replaced as well. In conclusion, replacing the Magnetron tube and noise filter will fix this
Question about Spacemaker JVM1640SJ Microwave Oven
...noise filter has failed. Just to make sure of the Magnetron failure, expose the device and, check the Magnetron temp fuse located near the device. this fuse will show no continuity when tested if ...
Question about Spacemaker JVM1640SJ Microwave Oven
where is the ceramic microwave fuse located on the ge spacesaver microwave model # jvm131h001" Its on the PC board of the noise filter
Question about Spacemaker JVM1640SJ Microwave Oven
noise. What can I do do fix it? I tried changing the Charcoal filter but I think we bought the wrong type same number on it but not aluminum. Hi, Here is a tip that will help you to figure out what is
Question about Spacemaker JVM1640SJ Microwave Oven
...NOISE FILTER ON VIKING VMOC205 ALL FUNCTIONS PERFORM WELL..WAS TOLD NOISE WAS COMING FROM MAGNETRON SO I REPLACED BUT NOISE (HUM) STILL THERE IN ALL FUNCTIONS. IS THIS A NOISE FILTER PROBLEM??? The ...
Question about 1.6 cu. ft. Over-the-Range Microwave in White MCO165UW
...noise filter it's good, no lights or anything I didn't know they had noise filters! :) Then you have blown a fuse. Check inside the oven chamber and look for missing powder paint or signs of arcing, ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions