...NISSAN ALTIMA WERE IS CRANK SHAFT POSITION SENSOR 20002 NISSAN ALTIMA AND HOW to get to it? 1st, Nissan had a recall on Crank position sensors for 2002-2006 Altima's. Check with you dealer before you ...
...CRANK POSITION SENSOR A CIRCUIT MALFUNTION 2003 NISSAN SENTRA 2.5LT. STARTS GOOD AND RUNS GOOD BUT GOT CODE P0335. WHAT SHOULD I LOOK FOR??? DO YOU HAVE ANY TROUBLE SHOOTING STEP??? AND WHERE IS THE ...
...know where the crank position sensor is on my 2001 nissan sentra Follow your plug wires to coil pack and module. Once you found the module, follow the wires from there to crank sensor on engine
...crank sensor? This engine has both. Nissan recommends replacing them at the same time, I think your local Nissan dealer will tell you the same thing.The cam and crank sensors are in the rear of the ...
...Nissan Pulsar N15 1.5L The cam and crank position sensor can be found in the front of the crank on the engine block below or next to the water pump in many applications.It can also be located on the ...
where is crank sensor located on nissan maxima 3.0 crank sensor is at the bottom of the crank pulley. right under neith the pulley is a 2 wire sensor bolted to the engine with 2 bolts.
Question about 2000 Frontier
...crank position sensor 2000. Nissan frontier. V6. P335 trouble code won't go away crank position sensor If you have replaced the crank sensor and the code comes back, it may be a problem with ...
Question about 2000 Frontier
...crank sensor on a 2009 Nissan Titan v8 truck? Try to start the truck, it will crank but not fire, mechanic said it's a crank sensor but need it's location on the truck i think it's the starter. On ...
Question about 2000 Frontier
...Nissan Serena 2004 model automatic is having problems with the crank shaft sensor. I have just put a new one, the car worked 4 a day, now it can't start, just cranking. what could be the problem? My ...
Question about 2000 Frontier
...Nissan pickup, I got fire going to the coils but not through the coils. I changed the coils. check ignition amplifier Sounds like you have a crank sensor problem. Scan for sensor function. You may ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions