Questions & Answers for: ninja motor wont

motor in my kawasaki zxr ninja 900 and now it wont start. the old motor has a plug attached to the cam and the new motor hasnt could this cause a problem as i dont know why the new motor hasnt got one

ninja i noticed after fitting the 2001 motor doesnt have the same sensor as the old motor the sensor went into the top left side of the head now the new motor doesnt have one at all and wont start its

motor back (or check your manual for location). If this has happened after the bike has sat unridden for a while it may be a fuel related restriction. i have a 2007 kawasaki 250f ninja i have had that

...ninja ex 500 one day i got on the highway and the rear wheel locked up and i heard a bang i drive a little bit and got off the highway i down shifted and the engine cut off there is no oil leaks or ...

...ninja wont start? I put the key in the ignition and the lights come on and there is electricity but the motor wont start? Make sure your battery has a full charge and if that doesnt help then follow ...

wont go forward only reverse try switching the wires on the motors and see if it goes forward then

...ninja EX250 motor for a 1998 kawasaki ninja EX250 motor now wont start I just replaced my motor in my 1999 kawasaki ninja EX250 (ie) bad motor . I replaced it with a rebuilt motor with 1500 miles on ...

ninja blender motor part is wore out the ninja will not turn the blade. new 72 oz pitcher I have and it still wont work as soon as you put food in it. Works with no food in it. The top of the ninja ...

wanting to know if a 2003 Kawasaki ninja zx9r motor will work on a 1993 Kawasaki zzr600 bike? Help me It wont

...ninja 636 wont go past 9000 rpm when riding it You need to take the bike to a shop to run a computer diagnostics, the rev limiter kicks in as a protection for the bike motor given ie: issues with oil ...