Questions & Answers for: nikon ls 2000

...(2 to 6 image) strips of negative film). Nikon LS-2000 and LS-30 film scanner service and repair. Check seller pjferrante2 on eBay. Scanner performance backed for 12 months. Very reasonable

Nikon LS 2000 hardware problem After a period of a few months of non-use, I turned on my LS 2000 & got the following message: "The stage locking screw is still in place. Please remove it." Needles to ...

...works consistently for me. You need to check that the ASPI drivers are loaded, otherwise it will not work. The LS-2000 works with Adaptec ASPI v4.71. These drivers do not come with the Nikon

...Nikon LS-2000 scanner that wouldn't work. I am using VueScan software (www.hamrick.com) a Macbook Pro, and a Ratoc FR1SX SCSI to Firewire adapter (available from amazon.com). After spending a lot of ...

...nikon ls 2000) My Dell Dimension, Pentium 4 w/ 2 gb RAM, won't recognize an older Nikon Coolscan LS 2000 that I just got from a friend. Followed the instructions from Nikon about disconnecting the ...

...Nikon LS 2000 to my Power Mac G4 I originally had the same problem but with a G5. Since Nikon never updated the software for the LS2000 to work with Apple I ended up buying a FR1SX adapter from RATOC ...

...LS-2000 is a "legacy" device to XP and the Nikon software. It needs to be connected to a true SCSI bus adapter, and it's actually pretty finicky about which ones will work in XP. Sorry, you won't be ...

Nikon LS 2000 scanner is reporting a hardware error Nikon LS 2000 is reporting a hardwared error. The error message gives the following number - Sense:0x04620000 Hello Mike, According to a previous ...

...Nikon LS-2000 scanner that wouldn't work. I am using VueScan software (www.hamrick.com) a Macbook Pro, and a Ratoc FR1SX SCSI to Firewire adapter (available from amazon.com). After spending a lot of ...

...Nikon LS 2000 Film Scanner says the stage locking screw is still in place but it was removed 10 years ago when I bought it. I tried to put the negative film adapter in, it didn't work. Then I put the ...