Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...nexxt 500 series washer won't spin Washer will go through cycle add water, drain water but won't turn the drum at all possibly the motor brushes. take back panel off. disconnect motor. remove bolts ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
bosch front loading washer nexxt 500 won't pump out water on the spin cycle could be drain hose is not high enough. I had the same problem and when I raised the hose it worked fine.
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...Nexxt 500 Series Washer Will Not Add Water During a normal wash cycle the washer stopped and gave an E:3- E:4 error code. I did everything manual recommends but unit will not restart a cycle. I ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...Nexxt 500 series dryer? If yes, does it require a kit from Bosch? yes ,it is possible,you don't require a kit from bosch,however,you will need to disassemble the machine.if you are not confident,get ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...should avoid using in my Bosch Nexxt 500 Series washer? Any clothes-washer HE (low suds) soap will do. Just be aware that you only need a tablespoon of the soap, not the 3/4 cup that comes in the
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...purchased a Bosch Nexxt 500 Series washer & dryer. The rubber ring around the front loading area of the washer has become mildew and smelly. Can this part be replaced? Sure go to ur whasher ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...drum of my bosch nexxt 500 washer the drum may have to be removed and taken apart in order to get the necklace out.or the chain may have to be broken and the rest ran down to the drain pump for ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...nexxt 500 series washer won't wash with cold water?? I turned off hot and it won't fill at all - it will only wash in hot water - why? The first thing to check is if the valve is open where the cold ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
My Bosch 500 plus series washer is displaying a E: error. There's no code after the E: and the door is locked. I've tried unplugging the washer but nothing happens. Check this link for tips: Door lock
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
nexxt 500 plus series washer gives an error code of E: and keeps flashing .... plugged it in and out still same error.... door is locked closed....no error number is displayed beside the flashing E:..
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions