...processor and replace the cooling paste and fix it again. refix the rams.. now it will work try changing the sticks of ram first in the suspect motherboard. i built my dad a brand new computer all ...
...does it support any higher processor? You have a socket 754 motherboard. That socket had been in use for just 2 years over 5 years ago. Obsolete. Get a new AM3 socket one and a new
...new board? Check the processor to make sure that it is seated properly. You will have to remove the fan and heatsink, but if you put the processor in yourself, it is possible that it didn't seat ...
...processor, or do I need a new motherboard? If I need a new motherboard what can I get that is compatible in size to my current one that will satisfy my need for more ram and faster processor speeds? ...
new icore cpu's For what I have read on this MOBO, it is AMD processor only board so it will not support Intel in any way. Below is the list of processors the board supports....alll AMD Athlon 64 X2 ,
Question about 7VM400M-RZ (GA-7VM400M-RZ) Motherboard
...processor is working , then i should get display on the monitor, i am not able to get even the basic bios kindly suggest me to a solution at the earliest. thanking you. Open ram Slat remove ram clean ...
Question about GA-M55plus-S3G Motherboard
...processor on a new board. You may also want to check if the processor has any burn or overheat marks. Also check if all the pins on the processor are in tact and aligned. If all is good then there is ...
Question about GA-EP35-DS3R Motherboard, LGA775, Intel P35, FSB1333, Dual DDR2, PCIe x16, SATAII, RAID, Gi
...idea whats going on. am not very computer wise.. from james. this like your processor have problem, it indicated by freezing at process try to clean your processor or change the processor with new ...
...processor crashes, restarting the board. This board is dead, time for a new one Make sure you attach power to both sockets on the board. I have circled them in red on the picture. It sounds like you ...
Processor also has fresh, new thermal paste on it? Heatsink is seated tightly, and level on Processor?The 4-pin ATX +12 Volt power cable is plugged in?http://www.playtool.com/pages/psuconnectors
Usually answered in minutes!
144 Questions
129 Questions
113 Questions
96 Questions
95 Questions