new kit, fresh gas, and spark plug. if i add some choke it runs better. all the jets are clean. carb was disassembled and soaked in engine tuner. It sounds like it is running really hot. Did you check
Question about Powermate DuraBuilt 1400 PSI Pressure Washer
pressure washer leaking gas from the air filter i looked around for advice and hurd bang against the carb and it will realease the float valve i did it and it worked but should i clean out the fuel in
...new less than 10 hours, but has been sitting for the past four years in a garage. It starts right up but will only stay running with the choke on. Would appreciate any advice. Thanks Miguel and owned ...
...washer. It worked the first day all day. In the morning i filled the gas with a fuel stabiler, and 30 oil. I may have over filled it. Upon turning it on the oil started leaking from the air filetr ...
...new gaskets. Install the fuel tank. Start the engine and check carefully for any sign of leakage around the tank and lines. Road test the vehicle for proper operation. 1993-97 Models CAUTION The fuel ...
Question about G 2600 VH 2,600 PSI Gas Pressure Washer
...pressure washer new about 2 or 3 years ago and use it once or twice a year for a few hours to wash the siding on my house. I admit to being guilty of not taking all the propper steps for long time ...
Question about G 2600 VH 2,600 PSI Gas Pressure Washer
pressure washer I've cleaned carburetor clean the gas tank put in new gas it will start with starter fluid but will not run i suggest the carbs not clean enough. there are some very tiny passages that
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions