NEGATIVE FILM, TPU: MONOCHROME NEG or TPU: POSITIVE FILM. FILM here indicates that the item being scanned is transparent to light; this setting is also used for slide scanning. Positive indicates that
...(2 to 6 image) strips of negative film). Nikon LS-2000 and LS-30 film scanner service and repair. Check seller pjferrante2 on eBay. Scanner performance backed for 12 months. Very reasonable
Question about Expression 10000XL- Photo Scanner 2400 x 4800 dpi Color MatrixCCD line sensor * AND ...
COLORED SLIDES HOW DO I SCAN THEM ON MY EPSON 2400 PHOTO SCANNER? do you have the optional film adapter? The optional Film Adapter (B81317) lets you scan negative film strips and slides
...film. The idea is that the print from this negative would be printed as a 4x11.5 inch photo. It's basically a 8x11.5 with the top and bottom of the print chopped off. The only other alternative is ...
scanning 110 negatives Is there a special adapter to do this? I tried using the one for 35 MM but it just did not work very well. You should be able to do about 12 at a time using the 35mm film strip ...
...negative using the film adapter in PhotoshopCS for Mac. Can't get calibration to work on "B&W Negative" scan setting. Don't have the film adapter so am trying to scan right on the glass platen. What ...
Question about Scanjetâ„¢ G3010 Flatbed Scanner
...negative to scan on hp g3010 scanner On the lid there are thin plastic rails that frame two 35mm Negatives. Place the film in that holder, framing what you wish. Check HP's site for the owners manual ...
Question about Scanjet G3010 Flatbed Scanner
negative film ? The film goes into the adapter and the adapter mounts on the underside of the lid. Complete manual available free at http://www.scribd.com/doc/7571067/HP-Scanjet-G3010-Users
...negative film adapter in, it didn't work. Then I put the slide adapter back in and I started getting the message that the locking screw was still in place. The lubricant has become sticky and is ...
Question about CanoScan LiDE 700F
...NEGATIVE FILM, it took me ages to figure out how to solve it. Solution: calibrate the frame, WITHOUT any film, adapter plug and placed in frame 1, and proceed to do the calibration WITH THE SCANNER ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions