...Stuck in the Machine? Is cloth too thik ? Is needle bent ? Hi, There is a chat room for Janome sewing machines at following link: http://sewing.patternreview.com/SewingMachine/Janome/ Hope this helps ...
Question about Memory Craft 9000 Computerized Sewing Machine
...needle threader stuck in up position. The automatic needle threader is stuck in the up position and the machine won't sew. I hear a clicking sound. How do I get the threader to lower. The instruction ...
Question about Memory Craft 3000
...needle, is something stuck in the machine or my fabric is to thick. None of htese apply. I have changed the needl and took the bobin out and cl I have took the bobin out and cleaned that area very ...
Question about Memory Craft 9000 Computerized Sewing Machine
...needle threader was stuck in the down position. We turned off the machine, and turned the wheel (which controls where the needle is) until the needle threader bar was straight (approximately 1/2 way ...
Question about Memory Craft 9500 Computerized Sewing Machine
stuck in the machine...no bent needle, cloth not too thick nor stuck in bobbin plate, my take up lever will not move. help please Put in new needle, turn off the machine and wait at least 3 mins so it
Question about Hello Kitty 11706 Mechanical Sewing Machine
why does the needle stop and get stuck after sewing for a short time Try to use proper needle.
...needle threader stuck My automatic needle threader is stuck in the down position and the wheel will not turn. How do I fix this? I am no opposed to removing the auto needle threader. You may have a ...
Question about MB4 Four Needle Embroidery Machine
needle is stuck. I powered down and tried restarting several times. I also removed needle plate and cleaned thread cutter. Do you have the MB-4 instruction Manual? http://janome.com/siteassets/support
Question about MB4 Four Needle Embroidery Machine
...needle bent is something stuck in machine. I just had a new circuit board put in. Why is this doing this That is the wierdest error message I've ever seen on a sewing machine. Did you try a brand new ...
Question about MB4 Four Needle Embroidery Machine
Needle threader on my Janome 500E is stuck. I'm fed up with it or can I fix this myself or do I need to go to the repair shop? Needle threaders tend to be problematic on most/all sewing machines, ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions