Questions & Answers for: Husqvarna needle plate

...plate and needle breaks When stitching out a embroidery design my machine suddenly binds up and the needle breaks. I try to remove the hoop but it is stuck to the metal plate underneath. What a mess ...

...needle plate, are there 2 small needle like pins in the plate? If one of them has broken out of the plate, you'll have a hard time getting it to sew correctly. If it is missing one, you need to buy a ...

...plate and sounds needle seems to be hitting the plate and sounds very loud sounds like the sewing head is out of line. Suggest that it be serviced by an authorized Husqvarna Viking Dealer. You can ...

...plate. The needle mechanism can be pushed to the left and then it clears the plate but a spring pulls the needle mechanism back to the right and we have the problem. Any ideas ...

...needle plate when free motion quilting. Forms a loop and the fabric can't move. Upper thread get s caught under the needle plate when free motion quilting. Forms a loop and the fabric ...

...needle plate, then it's possible that the machine is out of time and needs to be adjusted, or there is something wrong with the needle bar. ...

...plate. Is bobbin tension too tight? Is bobbin case not fitted correctly? Is timing off? Viking #1+. This could be bad timing, or the needle is not in properly. Make sure that the needle is pushed up ...

needle positioning the needle moved and is hitting the metal plate. don't know how to reposition it Start with a new needle. Next check the needle plate is installed properly.

...to reposition it I was embroidering and the needle moved on me. how do I fix it.the manual dosent cover this issue Put in a new needle. If that doesn't help, check to see if the needle plate is

...needle centered over the hole in the needle plate (check with a plate that has the single hole for straight stiching, not the slotted hole for zig-zag sewing). Take it to a professional for a tune