Questions & Answers for: Janome needle loose

loose check to see if the needle is in backwards if the presser foot is tight & needle is not in backwards then it could be a timming problem, since you said the needle is hitting the presser foot

...air use unwaxed dental floss but make sure to write down the setting it was on before cleaning. & also under the needle plate area in case there is loose threads or lint & also the bobbin ...

...tension may be to tightthe needle may be bent or damagedthread may be hanging up in bobbin case--check area for loose threads or lint check for burrs on the needle plate & on the bobbin ...

...or as far as it will go, then tighten the needle clamp screwupper tension may be to tightthe needle may be bent or damagedthread may be hanging up in bobbin case--check area for loose threads or ...

...or as far as it will go, then tighten the needle clamp screwupper tension may be to tightthe needle may be bent or damagedthread may be hanging up in bobbin case--check area for loose threads or ...

...loose and missing stitches I'm onloy using one needle on the left. SKIPPED STITCHES ON A SERGER 1. Is the needle bent or worn--replace 2. Is the needle inserted correctly into the needle ...

loose stitch right needle thread serger My right needle is coming out loose! I've tried changing the tension but it's not changing Unthread that needle and rethread making certain it is following the ...

...? There are several places that need oiling. Bobbin area and needle bars are the two main ones. Make sure your needles are all the way up sometimes the screws will vibrate loose on the needle bar

...Needle came loose &fell down into the bobbin area. Needle did not break off. I took off the plate and manually tried to move a new needle and shaft up/down. needle is hitting something If you did not ...

...Needle Plate Screw Is Loose The little screw that holds your needle plate in place can come loose and cause a knocking noise as your machine vibrates while sewing. ... Check to make sure the screw is ...