Questions & Answers for: needle loose


Question about PfaFF Sewing Machines

2 Answers

...needle comes loose. I presume something has worn on the machine. Is this a common problem? How can it be fixed? If it's a simple solution as I'd like to deal with it myself. It took Pfaff a month to ...


Question about Curvy 8770 Electronic Sewing Machine

1 Answer

needle. A.To correct loose stitches, try the following: (1) Balance the thread tension. If the stitches are loose on top of the fabric, decrease the tension to the next lower number. If they are loose


Question about STF17 Sewing Machine

1 Answer

loose thread on bottom of fabric and locks up needle Change needle Clean under needle plate where feed dogs are for lint Clean bobbin area for lint or loose threads Rethread machine top thread make ...

...loose threads or lint the needle may be bent or damagedthread may be hanging up in bobbin case--check area for loose threads or lint upper tension may be to tightthe needle may be bent or ...

...loose try changing the needle Correct needle insertion is mandatory for proper use of your sewing machine.Raise the needle bar to the highest point, then loosen the needle clamp screw to remove the ...

...needle clamp screw is loose 6. Top tension is too tight--loosen off one letter or number till the stitchlooks normal7.make sure that every thread guide is used when winding the bobbin,, so ...

Question about XR7700

1 Answer

...2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong foot is attached 5.the needle clamp screw is loose 6. Top tension is too tight 7. Machine could be out of ...

...needle tension is too loose or the bobbinthread, too tight, as shown in the bottom drawing at right.2 Nov 2008 Understanding Thread Tension - Threads ... my Juki HZL-F300. The thread guide has come loose. Had it replaced, but loose again and now needle won't go in. Please send me a picture of the needle bar where you put the thread guide back

...hitting bobbin loose needle incorect fitment of needle incorrect needle for machine needle / hook timing incorrect If you haven't already, install a brand new needle. A bent needle will cause

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6259 Answers

Brad Brown

Level 3 Expert

18666 Answers

tina gallow

Level 2 Expert

129 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides