needle will not pick up the bobbin thread, gets tangled when stitching. My user manual shows a little clip/rod to hold bobbin thread in place, my bobbin holder does not have one. It is brand new, ...
Question about 9120 Computerized Sewing Machine
...needle holder so it doesnt move, and at the same time turn the hand wheel a little. This adjusts the timing of the needle relative to the bobbin turning. then plug the machine in, and see if the ...
it isn't working!!! How do I fix this? you may have needle in wrong make sure needles flat side is back of the needle holder. Check if threaded correctly. I've done it before. Sometimes tension is off
...holder back into the case. Hold your needle thread gently forward with your left hand and turn the hand-wheel. The needle thread will pass down into the machine and catch a loop of the bobbin thread. ...
Question about 9105 Computerized Sewing Machine
...needle keeps hitting the bobbin holder, it has actually nicked it. I cannot sew, the bobbin thread just jams up in a bundle and the machine jams Check to make sure the needle is up all the way into ...
Question about Denim Sewlution 380 Mechanical Sewing Machine
...holder right. my needle is in the EP correctly! not sure if my Thread is correct in my machine. but I have read the manual and still cant get the needle to pic up. Can some one help me out on this! ...
rub against anything during it's full cycle. Sometimes a broken needle will indicate a timing problem or a incorrectly installed bobbin holder. Re-thread the machine and check for proper operation
Question about 9130 Sewing Machine
...is it the right needle for the fabric?is the needle inserted into the needle holder correctly?is the machine set correctly for straight stitch?it's possible that the machine could be out of
...NEEDLE take the old one out of the needle holderthen put the new one in--flat side to the back of the machine, push the needle all the way up into the needle holder & the tighten the screw back ...
Question about 9130 Sewing Machine
...needle holder in my Euro-pro ep550 will not tighten to hold the needle in the machine. how ill i buy another needle holder to fit my machine my machine is a overlock serger and hold 2 needles but I ...
Usually answered in minutes!
132 Questions
105 Questions
58 Questions
66 Questions
64 Questions
