Questions & Answers for: needle breaks

Ad

Needle breaks on my Shark Euro-pro model 361 my Every time I use my Shark Euro-pro model 361 my needle breaks. gone through sooo many needles. Are you inserting the needle fully into clamp? You may ...

Ad

Question about Shark 60 - 384

2 Answers

...needle breaks. It usually breaks the first time because the needle hits a straight pin, a hard spot in the fabric (like a double seam), or even pulling the fabric while stitching. Once it is out of ...

Ad

Question about Designer I

1 Answer

...Needle breaks wrong size needle for fabric wrong foot is attached needle clamp screw is loose also check for lint & pieces of broke needle under the needle plate also the bobbin case area -take ...

Question about Designer I

1 Answer

...and my bibs in the hoop??? HELP The needle breaks 1. The needle is incorrectly inserted 2. The needle clamp screw is loose 3. The is bent or blunt 4. The needle is too fine for the fabric being ...

Question about 1740 Mechanical Sewing Machine

2 Answers

...needle breaks I get a horrible grinding sound from the motor then the needle shatters and essentially shrapnel. What is going on? Needle breaks 1.the needle is damaged 2.the needle is not correctly ...

Question about 1740 Mechanical Sewing Machine

1 Answer

...Needle breaks 1.the needle is damaged 2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong foot is attached 5.the needle clamp screw is loose 6. Top tension is too ...

...Needle breaks 1.the needle is damaged 2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong foot is attached 5.the needle clamp screw is loose 6. Top tension is too ...

Question about Confidence 7463 Computerized Sewing Machine

1 Answer

...needle breaks Is the needle all the way up? Are you sure it's actually hitting the bobbin? It MAY--and quite possibly IS--inserted too low in the needle clamp. Make absolutely sure that it's all the ...

Question about Confidence 7463 Computerized Sewing Machine

1 Answer

...breaks The needle thread breaks 1. The needle thread is not threaded properly 2. The needle thread tension is too tight 3.the needle is bent or blunt 4. The needle is incorrectly inserted into the ...

breaks on the 2340CV Brother. Doing two needle and the right needle is breaking at the needle. Change needle and retreaded several times Probably depends what that needle is hitting that is causing it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6556 Answers

David Shaub

Level 3 Expert

2994 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...