Designer 1: upper thread shredding while embroidering HI, I hope someone can help with this problem. I have had my machine about 1.5 years and in Dec started having trouble with it in the embroidery ...
...breaking. I finally got the design done but I threw away all of the metallic thread I own. What causes this to happen and has it happened to anyone else? Try using a bigger needle Metallic needles ...
breaking needles I will start to embroider and it's working fine all of a sudden clunk, clunk the needle breaks in half or in three. This is happening all the time now. I have the floppy Designer 1. ?
...needle. That way you are never pulling the furry ends of thread back through the tension discs. Use a length of UNWAXED dental floss and clean out the top tension discs by running in several times ...
...Designer SE hit ball part of a pin while sewing heavy denim with jeans needle. Usually it will stop or needle breaks when this happens. This time all I hear is "whirring" noise but it will not sew or ...
Question about Designer I
...needle is not stable and moves in all directions. Can someone please help? it's possible that in breaking the needles, it's could have broken or damaged,, it needs to be serviced to see what ...
breaking. What can I do to correct this. I use a Brother pe700 This could be a number of things, or a combination of several. 1. Change the needle, as the eye may be burred. 2. Check Upper tension, as
...embroidering and had a problem with the bobbin case so I replaced it and when I tried to turn the machine back on it wouldn't. When I try to open the software it gives me an error messages that says ...
breaking at the needle eye may I suggest you try the following. Take out needle and lubricate just the eye with 3 in 1 silicone. Then allow to dry or use a tissue to dry off needle and this will leave
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions