Questions & Answers for: Jet need for speed

There is absolutely nothing you can do to change the speed, acceleration, braking etc. You will need a PPI programmer from PG Drives for this chair. Try Ebay, they sometimes have them, or call a tech

...need to find a wheelchair provider that has a PP1 programmer and have then check the settings for forward speed etc. If the speed is not set to 100 then they can increase the forward speed to 100%. ...

...need for the variable speed head assembly the part no. 114 which is figured in Page A in the manual. It's the shaft for recieving the tool. Pls. can you send me an offer for this shaft? Best Regards ...

...wiring diagram for a pronto 51 speed control switch I need a wiring diagram for a pronto m51 power chair control switch that will show me what color goes on which terminal. for that go to invacare ...

...need replaced. A-5 and A-6 on this page: http://www.ereplacementparts.com/jet-jssg10-708015-slow-speed-wet-sharpener-parts-c-32652_33059_33060.html No sound, no response at all when it is plugged in ...

speed say for in-door use or for elderly with slow reactions to better control the chair, if that is the case it depends on the controller you have it would need a programmer box, you can buy these on

The switch is not working. What should I do? Tried to take apart the handle,but could not. Bottle in place and not stopped up? Switch needs replacement.

...speed stuck on high. thanks. Talk to the maker of the chair, you'll probably need to replace the speed controller. You'll need the make, model and serial number of the chair when you contact

...be on and the yellow speed control should not be blinking. a flashing red indicates charging is needed. Strege ...