...need replace a part other than dragging it out to a repair place. Thanks! Did you mess with the alighnments?? I doubt that just an alighnment will help as they do tend to drift but all three tubes ...
...tweeking the controls all the time, wear them out but that would take alot of tweeking. If your set needs tweeking all the time then there is a problem in the convergence and should be addressed asap ...
Question about 43FWX20B 43" Rear Projection Television
convergence slowly change red moved about 3 inches all over screen red drifted to right over a period of days to about 3 inches off alignment,I search the web and found that the fusible resistors ...
Question about 43FDX01B TV
...need to do to fix it on my own? I've called around a few places and they are saying around $250 and $75 if they can't fix it. Please Help, Thanks for your time. -Dave i am not sure these is going to ...
...drift normally on large screen projection TV's over time or through moving them. The Hitachi 57f500a has a feature called "Magic Focus" (pg 36 in your manual) which will auto converge the image. If ...
Question about 46F510 46" Projection HDTV
what causes my picture to go pink all of the sudden ? there is no obvious reason for this to happen. I was told it could be a diode, to me this makes no sense. Please help!!! Examine the screen with ...
Question about NR83A2 2" To 3 1/4" Full Head Framer with Depth of Drive
need to take a sturdy "drift pin punch" and hammer to drive the drive pin back down into the nailer. (I use an old drive pin from a discarded nailer as a drift pin punch) Once the piston and drive pin
...drift, so manufacturers often include a utility to help you nudge the colors back in the right place. Most times this utility is buried in the Set Up Menu and when activated, produces a screen like ...
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions