Questions & Answers for: need change dash bulbs

...change them either. Am I gonna have to pull my dash apart to get to it? Help Thanks Bobbi The dash is lit by one or more bulbs located on the edge of that clear plastic. You may be able to get to the ...

...change the lights? i think it could be bulb issue. you have to remove the dash board and replace bulbs that are busted. replacing the bulb is no problem . the problem is taking the dash off. need to ...

...need to change a bulb on my dash and just to be sure I will change them all to avoid taking of the front fairing another 10 times.... I am thinking of using 3w bulbs (as used in the warning lights) ...

...change bulbs in the bumper [amber light]+the bulb on the heater temp control [dash] The amber lights in the bumper are a complete unit, (bulb cannot be removed without some or all of the amber light ...

...change it also my ciggerette lighter is not working would be grateful if someone could give advice please thankyou very much HI THERE I TAKE IT THE BULBS HAVE GONE BEHIND YOUR DASH FIRSTLY MAKE SURE ...

...need those wires. they hook up to your dash lighting, and draw power from your dash, take those wires out and see if any changes. Id first take the wires out, if no change then the bulbs are probably ...

...need to change the bulb and the socket assembly for the bulb..  The connector melts the contacts to the bulb burning out the connection to the bulb to the socket.. this is common part that we ...

...burned out. How can I change this bulb without going to the dealer? you have to take out nearly everything on the dash to get behind there. odds are its a diode and the board may need to be

change the das light colors if you wish. After all you will have all the bulbs open and accessible to you at the time. I need to replace the 4wd light on my jeep and will be changing over to all leds,

...CHANGE DASH BOARD LIGHT BULB NEED TO KNOW WHO TO GET TO THE BULB HAVE NO LIGHT AT ALL You going to have to buy a manual for your vehicle and take apart the dash so you can install the bulbs. Not to ...