NEC VT47 Blink Sequence but not comming up. Hi, My NEC VT47 Projector stopped working and I now get a blink sequence at power up. I thought the bulb might have gone bad but it was not the bulb. Can ...
Question about VT47 Multimedia Projector
NEC VT47 Lamp type VT70LP will not power up 2 red lights spear Lamp not working Hi all I have (2) NEC VT47 Lamp type VT70LP, one of the NEC VT47's stoped working so I took the lamp out of the good ...
NEC VT47 Cropped image on left side This projector seems to work well except that the image is cropped on the left side. This is a problem when I use it to demonstrate software to my classroom the ...
...this but have not had a chance to look at it yet, however if I don't reply now I might not get a chance later: http://www.aboutprojectors.com/pdf/nec-vt47-manual.pdf I hope it helps you (and me!) ...
Question about VT47 Multimedia Projector
vt47 projector replaced everything but no remote how do i reset i have replaced the bulb and filter and fan but i have no remote how do i get the projector to work again without a remote please help ...
projection is upside down. Need instructions on how to correct problem If this is the VT47 then press menu, scroll down to setup, orientation and then select the one you need!
NEC VT47 (using external speakers) There is an audio jack in the back of the NEC VT47 but when I plug in working speakers, nothing happens. The audio still is projected from the NEC internal speakers.
...NEC VT47 projector? I have tried to rotate the focus ring and it won't move I eventually fixed it; just a mechanical problem;I had to use strength to make the ring move again; The arrow shows the ...
i lost my software and i cant use my nec vt47 projector to my dell pc.how can i get the software? hi go to folowing link you will have your drivers http://diplodrivers.com/download-driver/NEC/VT47
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions