Questions & Answers for: nec projector status blinking

Question about VT37 Multimedia Projector

1 Answer

...Projector does not start! There are different rates at which the status light will blink to indicate various errors. See manual (link below) page 49 ...

Ad

Question about VT660 Multimedia Projector

2 Answers

Projector gets power, when first turned on power & status light are green. Then to goes into stand by mode power goes to blinking orange, status goes blinking red ( fast blinking) & it shuts off. this

Ad

...NEC VT 595 projector which wont turn on. It has a red blinking light. I changed the lamp but it has not changed the status. I had this same problem with 2 NEC VT595 projectors. My problem was that ...

Question about VT595 LCD Projector

1 Answer

status lamp blinking orange 6 times PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE

Question about LT265 Multimedia Projector

1 Answer

NEC LT265 projector keep blinking status led light. Hope can get a services manual to fix it. urgent jazz Download user manual from http://www.projectorcentral.com/NEC-LT265.htm

...NEC projector that keeps turning off. NEC LT260. I clenaed the filters, replaced the lamp, and now when I turn on the projector its on for about a minute then shuts itself of. The power button turns ...

Question about VT700 Projector

1 Answer

...NEC VT700 projector. I replaced the bulb and housing because it would no longer turn on and the status light would blink every 2.5 seconds indicating the housing on the lamp had an issue. I checked ...

Question about NP2000 Multimedia Projector

1 Answer

blinking Status light to repeat blinking 2 times 0.5 second of intervall and off 2.5 second of interval Sometimes the fan overheats. Pull the power plug out of the back for about 15 - 20 minutes. Then

Question about VT460 Multimedia Projector

1 Answer

...nec vt540k and it stop projecting images. When i turn it the power led turned in solid green, the fan start working withouth problem but in few seconds the status led turned it in yellow blinking 1 ...

...and the projector not turn on. NEC-NP50 NEC NP50 will not power on. The status lite keeps blinking. What would cause this to happen. Could be a bad power supply, or lose connection try another ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66834 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...