Question about Replacment Lamp Projector Lamp for VT470&VT670 - 3000Hrs Eco/2000Hrs Std 180W [ VT75LP
NEC 670 projector One of the NEC,s at my school has stopped projecting and makes a sound like it want to go on and then shut down (Red light keep blinking ) I replaces ed the bulb but got no ...
Question about MultiSync VT45 Multimedia Projector
NEC VT45 projector There is a flashing red light on our school's VT45 projector. The lamp has been replaced but the flashing red light remains. Any suggestions to try? make sure the doors are shut all
...NEC NP 4000 projector that is having trouble communicating with laptops. We had trouble with the wired remote the other week, but resolved that issue and now this comes up. Is there something we ...
...down I have an NEC NP1000 that will power up, strike the lamp, show an image for approx 30-45 seconds at which time the lamp shuts down and the machine powers off. The status light blinks red, 6 ...
Question about MultiSync MT1030 Multimedia Projector
...NEC MT1030+ on a gov auction with NO REMOTE. Lamp hours have exceeded the 2100 and projector is shut down. With out remote, how do I get it back on? Hello, Paul. You don't need the remote to power on ...
NEC NP 1150 Classroom projector less than 500 hours. After 15-20 minutes, the projector will shut down. Have cleaned filters and timer shut off turned off. System is controlled by a Crestron MPS-200 ...
NEC VT470. The projector shut down after the lamp finished. When I replaced the lamp and pressed the start button, the projector does not come back on. Some of the NEC units have a standby status when
...NEC Projector shuts down after about 15 min. Check for good air flow: that filters are clean and the fans are running and not blocked. Check the bulb hours - it may be nearing the end of its life ...
...NEC NP400 projector in our classroom and it constantly shuts itself down after about 15 minutes. Could the bulb be going bad or the projector overheating? Any help would be appreciated. Have you got ...
...projector comes on and never fully comes on then shuts down and red status light keeps blinking Below is the manual. go to troubleshooting on pg 56 and you can find out what the flashing LED means. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions