nec flat screen goes blank after 20 seconds the screen goes blank after 20 seconds and will not come back on unless you turn off the computer. Could something be wrong with the cables? i got the same ...
NEC Monitor LCD1700V The monitor screen goes blank after less than 5 seconds. I had a similar problem with a NEC LCD1935, and I traced it to the inverter board which was a Lien Chang LI-2190 ... it ...
Question about MultiSync LCD1830 18.1" LCD Monitor
Monitor displays breifly then goes to blank screen Hi, Whenever I turn on my monitor it displays the computers output briefly (~half a second) before going blank. I have tried the monitor on two other
...NEC MultiSync LCD2080UX powers up and I get the screen for about 2 seconds then it goes blank. If I turn the power off then back on the screen comes on for about 2 seconds and goes blank. On screen ...
Question about MultiSync LCD1735NXM (Silver, Grey) Monitor
...goes blank, but the power is still on. If you turn it on again the same thing happens Your video card may be the issue. Can you try another monitor or try this one on another PC? This will eliminate ...
Question about MultiSync LCD2010 20.1" LCD Monitor
NEC MultiSync lcd 2010 monitor blank screen I have 2 of these monitors with the same problem. On power up the green led will light & remain on but the screen remains black. On one of the monitors the ...
Question about NEC Display Solutions LCD2080UX + (White) 20.1" LCD Monitor
nec lcd 2080 sceen goes blank and will not come back till turned off for a while Hi , The monitor flicker problem. The monitor when turn on will display image for couple of second then turn black. The
Question about LCD1712 17" Flat Panel LCD Monitor
...goes blank, when on for the 10 seconds everything is easy to see and perfect on the screen, can it be repaired and how This is happen due to power problem please check your power connection due to ...
NEC VT590 projector. I want to show a PowerPoint presentation. As the computer is booting, the computer monitor is blank and the loading messages are shown on the projector screen. However, as soon as
Question about PlasmaSync 42PD3 42" Monitor
...nec plasma, will not pick up an incoming signal. it switches on (blank screen), but after around 20 seconds, it goes to standby. It's going into standby because it's not receiving anything on another ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions