Question about Electra Elite 32D-1 Corded Phone
Adding/Changing Name to NEC multi-line phone I am unable to change the name that is displayed on the screen of our office phones. they are NEC electra elite phones. (that is what the guide calls them)
...code for my nec n411i phone so that i can change it from 02 network to t mobile network but i havent got a cable to down load it so need to find a code i can input into my phone instead but nowhere ...
...NEC phone system How can I reset the passcode so that I can get my messages? No one knows the code? you need to get into the system manager mailbox to do this. If you do not know the code you will ...
Question about Electra Elite DTU 16D-2 Corded Phone
...Nec Electra Elite 192 phones to different wall phone jacks? Look for the Elite Attendant User Guide Also call your vendor for the password SET RELOCATION MODE Set/Cancel using the Access Code: 1. ...
nec electra professional 1 change name? Name change is program 4-18 in system programming, but very rare for the user to be familiar with that. Call your vendor, maybe they'll walk you through it. On ...
...on about 8 NEC systems, but for a PRO II, an Elite, and an IPK, the standard code is Feature,80, Feature from one of the two main reception extensions. Don't know the code for a 2000, 8100, or IPK
Question about Electra Elite DTU 16D-2 Corded Phone
...NEC DT700? Default code on an SV8100 system for name is SPEAKER, 700, takes you to extension label, press HOLD to bypass and get to name, type name using dial pad with * and # as move left or right, ...
Question about Electra Elite DTU 16D-2 Corded Phone
NEC DT300 Phone - extension phone not ringing but going directly to microphone. Unable to change Voice/Tone Setting without access code. Any idea what default code would be? Speaker 723 or intercom ...
Question about Electra Elite DTU 16D-2 Corded Phone
NEC DT300 series, and reset password. Previous employee held this position & no code was left behind. you may not be able to get to the VM. You may have to reset the system and start over if the PW is
Question about Electra Elite DTU 16D-2 Corded Phone
NEC IT3640D copier. We have a malfunction code C4101 on it. What can we do? When we turn it on it acts like it going to work but then makes a horrible noise and then the malfunction code C4101 come ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions