Questions & Answers for: nc 11 Medical

Question about SyncMaster 750S Monitor

1 Answer

...Here is the wiring colors for the VGA cable: 1- Red 2- Green 3- Blue 4- NC 5- Gray Shield 6- Red Shield 7- Green Shield 8- Blue Shield 9- NC 10- Violet 11- NC 12- Orange 13- Gray 14- Yellow 15- ...

Ad

Question about SyncMaster 750S Monitor

1 Answer

11 - NC 12 - DDC Data 13 - H-Sync 14 - V-Sync 15 - DDC Clock Hi, Apparently what you need are the wiring for the VGA cable itself. They would differ from manufacturer to manufacturer since it is not a

Ad

Question about SAMTRON 55V 15" CRT Monitor

1 Answer

...11 ID0 IN Monitor ID Bit 0 GND=Color; NC=MonoMonitor ID Bit 0 12 ID1 or SDA IN Monitor ID Bit 1 NC=Color; GND=Mono Some systems only uses ID0 for monitor ID 13 HSYNC or CSYNC OUT Horizontal Sync (or ...

Question about GA-945GM-S2 (0818313003065) Motherboard

1 Answer

...11) F_AUDIO (Front Audio Connector) This connector supports either HD (High Definition) or AC97 front panel audio module. If you wish to use the front audio function, connect the front panel audio ...

...nc 10=left ground 11=left front 12=right front 13=right ground 14=right rear 15=left rear A full service manual for the HTS3345 is available at http://www.scribd.com/doc/37538958/Philips-HTS3455 this ...

...NC 8. 9.line our L 10.B line out L power switch and LEDs 1.ide led + 2.P led + 3.ide led - 4. 5. 6. P led - 7.Ex1 SM 8. 9. GND 10. 11.Power switch 12. 13.GND 14.+5 spkr connector 15. 16. GND 17.Reset ...

Question about SAMTRON 55V 15" CRT Monitor

2 Answers

...11 - NC 12 - DDC Data 13 - H-Sync 14 - V-Sync 15 - DDC Clock The wire colours in the actual cable are: Red (foil wrapped with 1 bare ground wire) Green (foil wrapped with 1 bare ground wire) Blue ...

Question about SAMTRON 55V 15" CRT Monitor

1 Answer

I need a wiring diagram for a statitrol 501k2 air sampling detector 1-120VAC, 3-neutral, 12-com, 13- NC, 11-NO

Question about SAMTRON 55V 15" CRT Monitor

1 Answer

...NC terminals will have continuity.H5CX-A Timer has 11 screw terminal connections and timer is rated 100V to 250Volt AC 50-60Hz.Input is power IN > this is the 100V to 250Volts coming from breaker ...

Question about SAMTRON 55V 15" CRT Monitor

1 Answer

...ACCORDING TO THE LABELLS INDIACTED ON THE TIMER CAN BE TAKEN AS ACTIVE & NEUTRAL ENDS OF THE COIL i found a wiring diagram using google search term h3cr-a use images tab 11 is a common 8 is nc 9 is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...